CAN - en 
US Emerson AMS TREX Communicator
Order #: TREX
Emerson AMS TREX Communicator
Order #: TREX
Problems with Foundation Fieldbus and HART devices can be diagnosed in the field while the devices are still installed. Simple issues can be addressed on the spot, avoiding unnecessary, and potentially destructive, invasive physical investigation of the problem. Configure yours below.
Emerson TREX Highlights
- Commission and validate devices faster
- Quickly fix issues in the field with advanced device diagnostics
- Configure and test valves inline
- Improve efficiency with a modern, intuitive user interface
- Intrinsically safe; usable anywhere you need to go
Each TREX Includes
- AC Adapter
- USB Cable
- Lead Set with connectors
- Hand Strap
- Quick Start Guide and Resource DVD
- ValveLink Mobile application available at no charge once Trex unit is activated
Emerson AMS Trex Device Communicator Features
A Rugged and Reliable Device Communicator
For a communicator to be useful in the field, it must be built to last and ready for anything. The Trex communicator is designed to withstand the harsh conditions in and around manufacturing facilities. The rugged device is easy to hold, yet designed to take the bumps and drops that come from normal use in the plant. In addition, the Trex communicator is protected against moisture and extreme temperatures, allowing you to work regardless of environmental conditions. The sturdy exterior is designed in accordance with Intrinsic Safety standards to limit the buildup of static electrical energy. Unlike consumer-grade mobile devices, the Trex communicator will withstand the abuse of a harsh field environment.
Designed based on user feedback and with field use in mind, the carrying case features an access window that allows you to use the communicator and contains pockets large enough to carry the charger, extra lead sets, or other tools you may need in the field.
Touchscreen Display for the Field
The Trex communicator features a 5.7
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
-
Emerson TREX-FFPA-0001Power Plug for Foundation FieldbusOrder #: TREX-FFPA-0001
Mfg #: TREX-FFPA-0001
Availability: Ships in 2-3 weeks$154.35 -
Emerson TREX-PMDC-1211Device Communicator HART/FF Module
Order #: TREX-PMDC-1211
Mfg #: TREX-PMDC-1211
Availability: Ships in 2-3 weeks$2,785.65 -
Emerson TREX-PMDC-3611Device Communicator HART/FF Module w/ 3 Year Support
Order #: TREX-PMDC-3611
Mfg #: TREX-PMDC-3611
Availability:Out of stock$4,204.20 -
Emerson TREX-SUST-1211TREX Standard Support Renewal, 1 Year
Order #: TREX-SUST-1211
Mfg #: TREX-SUST-1211
Availability:Out of stock$405.00 -
Emerson TREX-0004-0001Lead Set with Connectors for TREX
Order #: TREX-0004-0001
Mfg #: TREX-0004-0001
Availability:Out of stock$160.23 -
Emerson TREX-0005-0002TREX Hand Strap, Replacement Set of Two
Order #: TREX-0005-0002
Mfg #: TREX-0005-0002
Availability: Ships in 2-3 weeks$108.78
| Processor, Memory, and Operating System | |
|---|---|
| Microprocessor | 800 MHz ARM Cortex A8 / NXP |
| Memory Internal Flash | 2 GB NAND and 32 GB extended flash |
| Operating System | Windows Embedded Compact 2013 |
| RAM | 512 MB DDR3 SDRAM |
| Physical | |
|---|---|
| Weight | Approximately 2.9 lbs (1330 grams) |
| Display | 5.7 inch (14.5 cm) color VGA resistive touchscreen |
| Keypad | X button – similar to a Back key |
Cables included with U.S., Europe, and U.K. plugs
| Power Supply / Charger | |
|---|---|
| Battery | Rechargeable Lithium-Ion power module |
| Battery Operating Time | 8+ hours of typical use |
| Charge Time | 3 to 4 hours |
| LEDs | 6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC adapter is charging the power module. |
| Battery Charger Options | Input voltage 90-264 VAC, 47-63 Hz |
| Connections | |
|---|---|
| USB | Micro USB Connector. USB 2.0 Remove the USB cable from the Trex unit before connecting to a device. |
| Battery Charger | Barrel Round Plug Tip |
>
| Wireless | |
|---|---|
| Wireless Approvals | FCC, CE, RED and IC Approvals, Certified for use in over 100 countries |
| Bluetooth | 2.1, Range up to 10 m |
| Wi-Fi | 802.11 b/g, Range up to 33 m |
| NFC | Active NFC, Range up to 20 cm |
| Communication Modules | |
|---|---|
| Device Communicator Communication Module | HART terminal Enables HART device communication Connectors: Two Banana Jack Plugs Optional Internal Resistor: 250 or 500 Ohm |
| Fieldbus (FF) terminal | Foundation Fieldbus device communication Connectors: Two Banana Jack Plugs |
| Device Communicator Plus Communication Module | HART terminal, Enables HART device communication |
| HART + power terminal | Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup. Connectors: Two Banana Jack Plugs Includes HART power supply, resistors (167 Ohm), current control, and ammeter. Current Range: 3 -22.5 mA mA terminal (external ammeter) Measures current on a 4-20 mA current loop.Connectors: Two Banana Jack Plugs. Current Range: Up to 22.5 mA. Resolution: 0.1 mA Fieldbus (FF) terminal Enables Foundation Fieldbus device communication. Connectors: Two Banana Jack Plugs FF + FF power terminal Provides power to one Foundation Fieldbus device in a bench setup. Connector: One Banana Jack Plug (Power conditioner included). Current Range: 0- 38 mA |
| Environmental | |
|---|---|
| Usage | -20°C to +55°C (-4°F to 131°F). For IS approval: -20°C to +50°C (-4°F to 122°F) |
| Charge | +10°C to +45°C (50°F to 113°F) |
| Storage with power module | -20°C to +50°C (-4°F to 122°F) (less than 1 month) |
| Storage without power module | -20°C to +60°C (-4 °F to 140°F) |
| Enclosure Rating | IP54 |
| Shock | The unit shall survive a 1-meter, all sides and corners drop test onto concrete. |
| Upgrade Studio Requirements | |
|---|---|
| Installation | Windows 7 Professional Service Pack (SP1) 1 (32 and 64-bit) Windows 10 Professional 512 MB of free disk space A Windows user account with Administrator privileges |
