Order #: 5627A-12-P-RENT1
Mfg #: 5627A-12-P-RENT1
Fluke Calibration 5627A-12-P for Rent, RTD Industrial Probe, -200 to 420C
Order #: 5627A-12-P-RENT1
Mfg #: 5627A-12-P-RENT1
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Product Highlights
The Fluke Calibration 5627A12P Precision Industrial RTD Probe with INFO-CON for 1523/1524, 12 in. x 1/4 in., -200 °C to 420 °C has a temperature range of up to 420 °C and an accuracy as good as ± 0.025 °C. This precision thermometer is shipped with its ITS-90 coefficients and a calibration table in 1 °C increments. One of the best features of the 5627A-12-P sensor is that it conforms to the standard 385 curve, letting you use your DIN/IEC RTD meters fully.
The 5627A-12-P is manufactured using a coil suspension element design for increased shock and vibration resistance. It has a mineral-insulated sheath with a minimum bend radius of 19 mm (3/4-inch) for flexibility and durability. It is individually calibrated and includes a NVLAP-accredited report of calibration from the manufacturer with lab code 200706-0.
Specifications |
|
Resistance | Nominal 100 Ω |
Temperature Coefficient | 0.00385 Ω/Ω/ °C nominal |
Temperature Range | ?200 °C to 420 °C (5627A-6 and 5627A-9 to 300 °C; transition and cable temperature: 0 °C to 150 °C) |
Drift Rate (k=2) | ± 0.04 °C at 0 °C after 100 hours at 420 °C |
Sheath Material | 316 Stainless Steel |
Leads | PTFE-insulated, nickel-plated stranded copper, 22 AWG |
Termination | Specify. See Ordering Information. |
Time Constant | Four seconds maximum for 63.2 % response to step change in water moving at 3 fps. |
Bending Radius | Sheath may be ordered with a bend on a minimum radius of 19 mm (3/4 in) except for 50 mm (2 in) area of sheath near tip. (Fluke lab requires 20 cm [8 in] of unbent sheath to re-calibrate.) |
Calibration | Includes manufacturer's NVLAP-accredited (lab code 200706-0) calibration and table with R vs. T values in 1 °C increments from -196 °C to 500 °C (to 300 °C for 5627A-6 and 5627A-9). ITS-90 coefficients included. |
Immersion | At least 100 mm (4 in) recommended |
Calibrated Accuracy |
- Fluke Calibration 5626-12-L Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,356.40
- Fluke Calibration 5623B-6-P Industrial PRT Probe, 1/4" x 6" FreezerIndustrial PRT Probe, 1/4" x 6" Freezer$2,009.00
- Fluke Calibration 5626-12-D Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,174.01
- Fluke Calibration 5623B-6-G Industrial PRT Probe, 1/4" x 6" FreezerIndustrial PRT Probe, 1/4" x 6" Freezer$1,993.60
- Fluke Calibration 5626-12-A Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,329.80
- Fluke Calibration 5624-20-J PRT Probe with Case, 1000C, 10 ohm, 0.25"x20", Banana PlugsPRT Probe with Case, 1000C, 10 ohm, 0.25"x20", Banana Plugs$8,314.60
- Fluke Calibration 5623B-6-S Industrial PRT Probe, 1/4" x 6" FreezerIndustrial PRT Probe, 1/4" x 6" Freezer$1,993.60
- Fluke Calibration 5623B-6-J Industrial PRT Probe, 1/4" x 6" FreezerIndustrial PRT Probe, 1/4" x 6" Freezer$1,993.60
- Fluke Calibration 5626-12-G Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,356.40
- Fluke Calibration 5626-12-S Secondary Std PRT Temp Sensor, 100ohm, -200C- 661C, Spade LugsSecondary Std PRT Temp Sensor, 100ohm, -200C- 661C, Spade Lugs$5,356.40
- Fluke Calibration 5626-12-P Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,329.80
- Fluke Calibration 5623B-6-L Precision RTD Freezer Probe, Mini Spade Lugs, -100 to 156CPrecision RTD Freezer Probe, Mini Spade Lugs, -100 to 156C$1,993.60
- Fluke Calibration 5624-20-D PRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", 5-pin DINPRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", 5-pin DIN$8,314.60
- Fluke Calibration 5626-15-B Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"$5,492.20
- Fluke Calibration 5624-20-S PRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", Spade LugsPRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", Spade Lugs$8,314.60
- Fluke Calibration 5623B-6-M Industrial PRT Probe, 1/4" x 6" FreezerIndustrial PRT Probe, 1/4" x 6" Freezer$1,993.60
- Fluke Calibration 5624-20-G PRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", Gold PinsPRT Probe with Case, 1000C, 10 ohm, 0.25" x 20", Gold Pins$8,314.60
- Fluke Calibration 5626-15-D Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"$5,492.20
- Fluke Calibration 5626-15-A Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"Secondary PRT Probe, 100 ohm 1/4" Diameter x 15"$5,474.00
- Fluke Calibration 5626-12-B Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"Secondary PRT Probe, 100 ohm 1/4" Diameter x 12"$5,356.40