Fluke 8810A 5.5 Digit Digital Multimeter with Option 08: AC Converter
5-1/2 Digit Multimeter
Order #: 8810A-RENT2
Mfg #: 8810A-RENT2
Call for price
Call for price
Fluke 8810A 5.5 Digit Digital Multimeter with Option 08: AC Converter
5-1/2 Digit Multimeter
Order #: 8810A-RENT2
Mfg #: 8810A-RENT2
Call for price
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Call for price
Availability: Call for Availability
Fluke 8810A Highlights
The Fluke 8810A is a low cost, 5½-digit voltmeter/DMM. It is a high precision autoranging meter that offers a number of options. With the basic configuration, the 8810A is a voltmeter. Options add resistance, AC voltage, and TRMS measurement.
- Ranges: ±200 mV, ±2 V, ±20 V, ±200 V, ±1200 V
- DC input resistance: On 200 mV to 20 V range is ≥1000 MΩ, on 200 V to 1200 V range is 10 MΩ
- Normal Mode Noise Rejection: ≥60 dB
- Common Mode Noise Rejection: ≥120 dB
- Resolution: 1 µV on 200 mV range
- Overload protection on 200 mV to 20 V range: ±1000 Vdc, 1400 Vpeak ac
- Overload protection on 200 V, 1200 V range: ±1200 Vdc, 1700 Vpeak ac
- Offset current: <15 pA
- Full autoranging (rated at 600 ms maximum per range change) or manual ranging
- Automatic bipolar, + or - display
- Reading rate: 2.5 readings per second, within the same range
- MTBF: 10,000 hours calculated, minimum
- Maximum Common Mode Voltage: 1000 VDC or peak AC
- Maximum Lo to GUARD Voltage: 100 VDC or peak AC
- Data Output Unit (Option 002)
- Available data: Digits, Polarity, Range
- Data output form: Isolated BCD, with compatible TTL/DTL levels
- Data coding: 8-4-2-1 BCD positive-true parallel
- Drive capability: All outputs an drive a minimum of two TTL loads
- Flags: Busy, not Busy, Overload
- Controls: External trigger, external trigger enable, +5 V reference
- Ohms Converter (Option 007)
- Ranges: 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2000 kΩ, 20 MΩ
- Resolution: 1 mΩ on 200 Ω range
- Overvoltage protection: 300 Vrms or dc, applied continously to any range
- Maximum open circuit voltage: 3.3 V
- Response time: 1.0 s maximum to displayed input on 200 Ω to 200 kΩ range
- AC Converter (Option 008)
- Ranges: 2 V, 20 V, 200 V, 750 V
- Input impedance: 2 MΩ shunted by <100 pF
- Resolution: 10 µV on 2 V range
- Overload protection: 750 Vdc or rms sinewave, not to exceed 2 x 107 volts hertz product
- TRMS Converter (Option 009)
- Ranges: 2 V, 20 V, 200 V, and 750 V
- Resolution: 10 µV
- AC input impedance: 1 MΩ in parallel with 100 pF
- Crest factor: 3.0
- Response time: 1.5 s
- Overload protection: 500 Vdc or 750 Vrms or 1100 Vpea
Related Products
-
-
Fluke 8520A for Rent, Digital Multimeter with IEEE-488 ConnectionDigital Multimeter IEEE-488 ConnectionCall for price
-
Fluke 787 for Rent, ProcessMeter, Digital Multimeter and Loop CalibratorProcessMeter, DMM and Loop CalibratorCall for price
-
-
-
Fluke 8505A for Rent, Digital Multimeter, 5.5 Digit Readings at 500/secDMM 5-1/2 Digit Readings at 500/secCall for price
-
Fluke 8508A for Rent, Reference Multimeter, 8.5-Digit resolution, True Ohms measureReference Multimeter 8.5-Digit resolution, True Ohms measureCall for price
-
Keysight 3468A for Rent, Autoranging Digital Multimeter, 5.5 Digit, DC VoltsAutoranging Digital Multimeter 5.5 Digit, DC VoltsCall for price
-
Fluke 433 for Rent, Three-Phase Power Quality AnalyzerPower Quality Analyzer Three-PhaseCall for price
-
Fluke 287 for Rent, True-RMS Electronics Logging Multimeter with Trend CaptureTrue-RMS Electronics Logging Multimeter with Trend CaptureCall for price
-
-
Fluke 8050A for Rent, Digital Multimeter, 4.5 Digit Portable with Option 001DMM 41/2 Digit Portable with OPT 001Call for price
-
Keysight 3478A for Rent, Digital Multimeter, 3.5 to 5.5 digit resolution, 100nV SensDigital Multimeter 3? to 5? digit resolution, 100nV SensCall for price
-
Fluke 77 for Rent, Digital Multimeter, 1000V DC/AC 10A DC/AC, 32 MohmDigital Multimeter, 1000V DC/AC 10A DC/AC, 32 MohmCall for price
-
Fluke 789 for Rent, ProcessMeter, Digital Multimeter and Loop CalibratorProcessMeter, DMM and Loop CalibratorCall for price
-
Fluke 233 for Rent, Digital Multimeter with Wireless DisplayDigital Multimeter with Wireless DisplayCall for price
-
Keysight 34401A for Rent, Digital Multimeter, 6.5 Digit Resolution, 1000V Max InputDigital Multimeter 6.5 Digit Resolution, 1000V Max InputCall for price
-
-
-
Tektronix 067-1338-00 for Rent, Calibration Step GeneratorCalibration Step GeneratorCall for price
How to Rent from Transcat
1. Select Your Rental Product
- Need help selecting a unit? Try using our Product Finder or search our available units
- Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
2. Contact Our Team of Rental Experts
- Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
3. Select Your Rental Period & Complete Your Order
- Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
- Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit