Used Fluke 437-II 400Hz Three-Phase Power Quality Analyzer
400Hz Three-Phase Power Quality Analyzer
Order #: 437-II-USED
Mfg #: 437-II
Call for price
Call for price
Used Fluke 437-II 400Hz Three-Phase Power Quality Analyzer
400Hz Three-Phase Power Quality Analyzer
Order #: 437-II-USED
Mfg #: 437-II
Call for price
Request a Used Instrument Quote
Have a Question? Speak to a Transcat Expert: 800.264.4059
Transcat Used Instrument Guarantee
Calibration Certificate Included 6 Month Warranty Unsurpassed Service & Support
Call for price
Availability: Call for Availability
This item is available as RENTAL at
Call for price
Shop now
Product Highlights
- 400 Hz measurement: By increasing the power frequency to 400 Hz, transformers and motors can be much smaller and lighter than at 50 or 60 Hz, which is an advantage in aircrafts, submarines, space crafts, and other military equipment and hand-held tools. The 437 II model captures power quality measurements for these types of avionic and military systems.
- Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
- PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
- Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
- Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
- Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
- Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex design to fit into the tightest places.
- Automatic Trending: Every measurement is always automatically recorded, without any set-up.
- System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
- Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
- View graphs and generate reports: With included analysis software.
- Battery life: Seven hours operating time per charge on Li-ion battery pack
Related Products
-
Fluke 1750 Three-Phase Power Quality Recorder Used for SaleThree-Phase Power Quality Recorder$15,529.08
-
Used Keysight / Agilent E9321A E-Series Peak and Average Power Sensor, 50MHz to 6GHzE-Series Peak and Average Power Sensor, 50 MHz to 6 GHz$1,715.70
-
-
Used Keysight / Agilent 6264B DC Power Supply, 20V, 20A, 400WDC Power Supply 20V, 20A, 400WCall for price
-
Used Keysight / Agilent 66319D 15V, 3A Mobile Communications Dual DC Source15V, 3A Mobile Communications Dual DC Source$2,811.25
-
Used Yokogawa WT3004E Precision Power Analyzer, 4 ChannelPrecision Power Analyzer 4-Channel$26,008.15
-
Used Keysight / Agilent E4351B Solar Array Simulator (SAS), GPIB 120V, 4A, 480W120V, 4A, 480W Solar Array Simulator (SAS), GPIB$5,318.67
-
Used Megger MPQ1000-GOLD KIT 3-Phase PQ Analyzer Kit with 27" 6000V Clamps3-Phase PQ Analyzer Kit with 27" 6000V ClampsCall for price
-
Used Fluke I1A/10A-PQ3 1A/10A Clamp for Used Fluke 435-II1A/10A Clamp for Fluke 435-IICall for price
-
-
-
-
-
-
Used Fluke 1738 3-Phase Energy Logger with Inrush and Waveform Capture3-Phase Energy Logger w/Inrush & Waveform CaptureCall for price
-
-
Used Fluke MDA-550 Motor Drive Analyzer, PRO, 4-channel Color, 0-1000VACMotor Drive Analyzer, PRO, 4-channel Color, 0-1000VACCall for price
-
Used Keysight / Agilent E3631A Triple Output DC Power Supply, 6V, 5A and +/-25V, 1A, 80W6V, 5A and +/-25V, 1A, 80W Trip Output DC Power Supply$1,461.67
-
Used AEMCInstruments PEL 103 Power & Energy Logger with LCD Display, 2000V and 10000APower & Energy Logger w/LCD 2000V and 10,000A$1,995.00