Siglent SHS1202X
Handheld Oscilloscope, 200MHz; 2 isolated channels, 1GSa/s

Order #: SHS1202X

Mfg #: SHS1202X

Questions about availability or need help? Contact Us:

(800) 633-0561
$3,358.60

Siglent SHS1202X

Handheld Oscilloscope, 200MHz; 2 isolated channels, 1GSa/s

Order #: SHS1202X

Mfg #: SHS1202X

$3,358.60
Availability: Call for Availability

Choose Your Options:

Add Calibration

You have chosen to add the following Calibration Services to Your Order

Make sure your instrument is calibrated and ready to use the minute you open the box by adding our expert calibration service. Why Calibrate? For a complete descriptions of Transcat Service Levels, click here.

Already have this this item and need calibration? Request a calibration quote

Product Highlights

Handheld Oscilloscope, 200MHz; 2 isolated channels, 1GSa/s; 12M points memory depth; 1 Mpts FFT; 6000 counts DMM; Includes Recorder mode, including Sample and Measurement Loggers; IP Rating: IP51 isolation level: CATII 1000V and CATIII 600V

Siglent's Handheld Digital Oscilloscopes include the SHS800X and SHS1000X models. Both feature 2 analog oscilloscope input channels and are available in 200 MHz and 100 MHz analog bandwidths, a single ADC with 1 GSa/s maximum sample rate, and a single memory module with 12 Mpts memory depth. When two channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 6 Mpts. When only a single channel is active, the maximum sample rate is 1 GSa/s and the maximum record length is 12 Mpts. For ease of use, the most commonly used functions can be accessed with its user friendly front panel design.

The SHS800X series has two non isolated scope channels and one isolated multimeter channel. The SHS 1000X series features full isolation between the two oscilloscope channels, one multimeter channel, power adapter and the USB host/device port. The full isolation makes it ideal for both laboratory and floating signal measurement because it reduces the risk of accidental short circuits.

The max voltage input to the analog scope inputs is CATIII 600V rms, CATII 1000V rms. And the max input for the multimeter is CATIII 600Vrms, CATII 1000Vrms.

The SHS series utilizes a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. It comes with a vertical input range from 2mV/div to 100V/div, and a max offset range up to 400V.

The innovative digital trigger system delivers high sensitivity and low jitter, and a waveform capture rate of up to 400,000 frames/sec. The SHS also employs a 256 level intensity grading display function and a color temperature display mode for clarity and fast fault identification.

The SHS' have multiple powerful triggering modes including serial bus triggering as well as free decoding for IIC, SPI, UART, CAN, LIN bus types.

The SHS models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Another powerful addition is the new 1 million point FFT math function that gives the SHS very high frequency resolution when observing signal spectra. The new digital design also includes a hardware coprocessor that delivers measurements quickly and accurately without slowing acquisition and front panel response.

The SHS series feature built in sample and measurement value recorders. The sample recorder can achieve a maximum sampling rate of 25 kSa/s, and can record for up to 22 hours at this sampling rate. The measurement value recorder can simultaneously record 4 sets of measurement values at a recording interval as low as 0.1s which delivers up to 25 hours of continuous recording.

The SHS series integrates a 6000 count digital multimeter, isolated from the scope that can measure DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Diodes, and Continuity

A rechargeable 6900 mAh lithium battery support s up to 5.5 hours (4 hours SHS1000X) of work without a charge.

The handheld oscilloscopes feature a sealed IP51 dust and drip proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.

Key Features

  • 200 MHz, 100 MHz bandwidth models
  • Sample rate of 1 GSa/s (single channel), Sample rate of 500 MSa/s (two channels)
  • The Siglent SPO technology
    • Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode)
    • Supports 256 level intensity grading and color temperature display modes
    • Record length up to 12 Mpts
    • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
  • Serial bus triggering and decoding (Standard) for IIC, SPI, UART, CAN, and LIN protocols
  • Video trigger HDTV
  • Low background noise with voltage scales from 2 mV/div to 10 0 V/div
  • 3 one button shortcuts for Oscilloscope, Multimeter and Recorder functions
  • 8 one button shortcuts for: Run/Stop, Auto Setup, Default, Measure, Cursors, Display/Persist, Clear Sweep and Print More function shortcuts available when combined with the shift button
  • Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
  • History waveform record (History) function (maximum recorded waveform length is 80,000 frames)
  • Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
  • 1 Mpts FFT Support Peaks and Markers
  • Math and measurement functions use all sampled data points (up to 12 Mpts)
  • Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
  • Default key can be customized for user settings or factory "defaults"
  • Supports Multi language display and embedded online help
  • Security Erase mode
  • Search and navigate function
  • Includes Recorder mode, including Sample and Measurement Loggers
  • 6000 counts Digital Multimeter, Support DCV, ACV, DCI, ACI, Resistance, Diode, Capacitance, Continuity test.
  • True RMS AC Voltage/Current measurement multimeter
  • 5.6 inch TFT LCD display with 640 * 480 resolution
  • Interface types: Isolated USB Host, USB Device (Micro USB TMC)
  • Supports SCPI remote control commands
  • UL2054 certified lithium battery pack, 6900 mAh capacity, external charger
  • IP Rating: IP51
  • Compliance with UL61010 1, UL61010 2 030, UL61010 2-033
Win a Generac Generator when purchasing $750 or more from Transcat.Win a Generac Generator when purchasing $750 or more from Transcat.
  1. Siglent BAG-H1 Soft Carry Case for SHS800X/SHS1000X
    Siglent BAG-H1
    Soft Carry Case for SHS800X/SHS1000X

    Order #: BAG-H1

    Mfg #: BAG-H1

    Availability: Ships in 3-4 weeks
    $63.00
  2. Siglent RRC2057 7.2V 6900mAh battery for SHS800X and SHS1000X
    Siglent RRC2057
    7.2V 6900mAh Battery for SHS800X and SHS1000X

    Order #: RRC2057

    Mfg #: RRC2057

    Availability: Ships in 3-4 weeks
    $208.60
  3. Siglent GSCH4000A Smart Battery Charger for SHS800X/SHS1000X Series
    Siglent GSCH4000A
    Smart Battery Charger for SHS800X/SHS1000X Series

    Order #: GSCH4000A

    Mfg #: GSCH4000A

    Availability: Ships in 3-4 weeks
    $320.60
  4. Siglent SCD600MA Current Measurement Accessory, 600 mA for SHS800X and SHS1000X
    Siglent SCD600MA
    Current Measurement Accessory 600mA for SHS800X and SHS1000X

    Order #: SCD600MA

    Mfg #: SCD600MA

    Availability: Ships in 3-4 weeks
    $26.60
  5. Siglent SCD10A Current Measurement Accessory, 10 A for SHS800X and SHS1000X
    Siglent SCD10A
    Current Measurement Accessory 10A for SHS800X and SHS1000X

    Order #: SCD10A

    Mfg #: SCD10A

    Availability: Call for Availability
    $26.60
Model SHS810X SHS820X SHS1102X SHS1202X
Bandwidth 100 MHz 200 MHz 100 MHz 200 MHz
Sample rate (Max) Two-channel share a single 1 GSa/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel is active, that channel has a sample rate of 1 GSa/s
Channels 2 analog oscilloscope channels, 1 multimeter channel
Memory depth (Max) 6 Mpts/CH (dual-channel mode); 12 Mpts/CH (single channel mode)
Waveform Capture Rate (Max) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Trigger type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Serial Trigger and decoder IIC, SPI, UART, CAN, LIN
Data Logger (Recorder) Sample Logger. The Max sample rate is 25 kSa/s, the Min sample rate is 1 Sa/s
Measurement Logger. The Max interval is 10 minutes, the Min interval is 0.1 second. The Max items of logging is 4
I/O USB Host, USB Device
Max Input Voltage (Scope) CAT II 300Vrms Between BNC Signal and Protecting Earth; CAT II 30Vrms Between BNC GND and Protecting Earth; CAT II 300Vrms Between BNC Signal and BNC GND CAT III 600Vrms, CAT II 1000Vrms Between BNC Signal and Protecting Earth; CAT III 600Vrms, CAT II 1000Vrms Between BNC GND and Protecting Earth; CAT III 300Vrms Between BNC Signal and BNC GND
Max Input Voltage (Meter) CAT III 300Vrms, CAT II 600Vrms CAT III 600Vrms, CAT II 1000Vrms
Probe PP510 PP215 PB925
Display 5.6-inch TFT-LCD (640x480)
Weight Without package 1.75 kg. With package 3.5 kg