- Destructive and nondestructive test modes
- Force hold duration up to 999 seconds in 1 second increments
- Color-coded LED indicators for Go/No Go testing
- Selectable digital speeds 10/25/50/100 mm/min
- Save up to 26 test configurations in memory
- OLED_electro luminescent display is highly visible in dark environments
- Time and date stamp
- Selectable units: lbf, kgf, and N
- 1,500 data memory for recall or download (RS-232C output)
- Kit includes, terminal grip, wire cam grip, ACT Logger data acquisition software, USB_cable, calibration cert traceable to NIST
- Many optional crimp attachments available
Each Unit Includes
- CT_Logger data acquisition software. ACT Logger downloads data from the tester memory and/or captures peak data while testing via the USB output. All tester programming can be set from the software.
- 3-Point Certificate traceable to NIST
Specifications
- Resolution: 0.1 lbf, 1N, 0.1 kgf
- Accuracy: +/-0.5% F.S. +/-1 digit
- Force Units: lbf, N, kgf (selectable)
- Overload Rating: Approx. 150% F.S.
- Speed Ranges: 10/25/50/100 mm/min or 0.5, 1.0, 2.0, 4.0 in/min (Selectable)
- Hold Duration: up to 999 seconds in 1 second increments
- Stroke: Approx. 50mm
- Sample Diameters: 12 slots, 1 to 8mm
- Sample Length: 100mm (4") or more
- Test Modes: BREAK (destructive)/KEEP (non-destructive) modes
- Test Profiles: Saves up to 26 patterns (A to Z)
- Internal Memory: 1500 data
- Outputs: USB/RS232C (for printer output)/Judgment signal (OK/NG)
- Operating Conditions: 0C to 40C, 20 to 80%RH
- Standards: ACT-220 meets test conditions of wire crimp test standards. Review the details of the following standards: UL 486A-486B, ASTM B913, ANSI/EIA-364-38B, MIL-DTL-22520G, NASA-STD-8739.4
The ACT-220 Automatic Wire Crimp Tester is designed to measure the strength of wire crimps, up to 220 lbf (1000 N). This tester features: Easy-to-use menus, OLED_electro-luminescent display, an easy to use keypad simplify crimp test programming and much more.
The tester conforms with UL 486A-B as well as other ASTM, MIL, ANSI/EIA, NASA, IEC and JIS crimp testing standards. See the specifications table for more details.
The wire terminal grip has 12 slots which accommodate wire diameters from 1 to 8 mm (approx AWG 30
