The Fluke Networks SRC9SCAPCSCAPC03M Port Protector Cord is designed to be installed in the port of an OTDR and then attached to the appropriate test reference cord or launch cord. The end of the cord remains plugged into the tester during testing and the fibers under test are plugged into the other end. This greatly reduces the risk of damage to the tester's port, which can be difficult and costly to repair. Instead, if the port protector cord is damaged, this is easier and faster to replace. The SRC-9-SCAPC/SCAPC-0.3M features reference-grade connectors and fibers to minimize the impact of the cord on the measurements. The short length and location next to the port of the OTDR makes it invisible to the OTDR and will not negatively impact the user's measurements.
- Connectors: SC APC/SC APC
- Designed to be installed in OTDR's port and attached to compatible test reference cord or launch cord
- End of cord remains plugged into tester during testing and fibers under test are plugged into other end
- Greatly reduces risk of damage to tester's port, avoids difficult and costly repairs
- Short length and location next to port will not negatively impact measurements
- Features reference-grade connectors and fibers to minimize impact of cord on measurements
Applications
- Fiber Optic Certification & Loss Testing
- Tight-Loss Requirement Networks
- Wizard-Assisted Setups
Each Unit Includes
- 1 - OTDR Port Protector Cord, Single-Mode, 9 µm, SC APC/SC APC Plastic Connectors, 0.3m (SRC-9-SCAPC/SCAPC-0.3M)
