PIE 235
Process Voltage Calibrator
Order #: PIE 235
Mfg #: PIE 235
$1,692.60
$1,692.60
The PIE 235 Process Voltage Calibrator checks, calibrates and measures voltage instruments. The 20V range has an extended span of up to 24V giving you a portable source for powering your loops. The PIE 235 has a pH simulator used to verify proper operation of pH devices before you place a probe into a calibrated buffer
Availability:
In stock
This item is available as RENTAL at
Call for price
Shop now
Product Highlights
- Source three ranges of mV & V dc plus percent of 1 to 5 volts
- With the 235 you can check, calibrate and measure all your voltage, millivolt and pH signal instruments in your plant. Source -500.00 to 999.00 mV, 1.000 to 5.000 V, -25.00 to +125.00% of 1 to 5 V; 0.000 to 20.000 V.
- Power your loops with over 1,000 Ohm loads
- The 20.000 V range has an extended span of up to 24.000 Volts giving you a portable source for powering your loops.
- Read DC volts
- The 235 can measure from -500.00 to +999.00 mV, 0.000 to 5.100 V, -25.0 to 125.0 % of 1 to 5 V; 0 to 20.000 V and 0.00 to 60.00 V DC. Use it to check loop power supplies, I/V converters, 1 to 5 Volt signals, and other voltages.
- Save time calibrating recorders and monitors in 4 to 20 mA loops
- Other brands of calibrators require that you break the loop to calibrate voltage inputs. With the PIE 235 you simply clip the test leads across the voltage inputs in a live 4 to 20 mA loop without disconnecting any wires.
- Simulate pH probes into transmitters & analyzers
- Use the pH simulator to verify proper operation of pH devices before you place a probe into a calibrated buffer.
- Quickly set any three outputs plus automatic stepping & ramping
- Easily set any value with the adjustable DIAL plus store any three output settings for instant recall with the EZ-CHECK switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 & 60 seconds.
- Use in the Plant, Field or Shop
- Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
- Simple Battery Changes
- Separate compartment for no-tool battery changes with four inexpensive "AA" batteries
Advantages of the PIE Model 235
- Wider ranges with greater accuracy
- More than twice as accurate with 10 times greater resolution.
- Automatic stepping
- Larger display with backlight
- Easy viewing in dark locations
- More Resistant to Accidental Damage
- Rubber Boot and Stronger Switches
- Separate Battery Compartment with 4 "AA" Batteries
- No more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact.
- Simulate a pH probe
- Calibrate pH transmitters and analyzers before attaching probe to verify that each is working correctly.
- Includes Certificate of Calibration
- All PIECAL Calibrators come with a free signed and dated certificate.
Related Products
-
-
-
-
-
Fluke Calibration 1586A/1HC Super-DAQ with 1 High-Capacity Module (120V)Super-DAQ with 1 High-Capacity Module (120V)$6,406.40
-
Extech PRC15 Current & Voltage Calibrator/Meter with NIST CertificateCurrent & Voltage Calibrator/ Meter with NIST$880.60
-
Fluke Calibration 1586A Super-DAQ 1 Hi-Capacity Module (120V) Accredited CalibrationSuper-DAQ 1 Hi-Capacity Module (120V) Accredited Calibration$6,920.20
-
Druck DPI620G-B Electrical CalibratorElectrical CalibratorSpecial Price $4,827.42 Regular Price $5,247.20
-
-
Fluke Calibration 1586A/1DS 120 Super-DAQ 1 DAQ-STAQ Module (120V)Super-DAQ 1 DAQ-STAQ Module (120V)$9,105.60
-
Extech 412355A Current & Voltage Calibrator/ Meter KitCurrent & Voltage Calibrator/ Meter Kit$446.59
-
Fluke Calibration 1586A/2DS 120 2 DAQ-STAQ Super-DAQ Modules 120V2 DAQ-STAQ Super-DAQ Modules 120V$12,864.60
-
-
Fluke 709H Precision Current Loop Calibrator with HARTPrecision Current Loop Calibrator with HART$2,439.83
-
-
Fluke Calibration 1586-2588-CBL DAQ-STAQ Multiplexer Interface Cable, over 6 ft long (200 cm)DAQ-STAQ Multiplexer Interface Cable, over 6 ft long (200 cm)Special Price $417.15 Regular Price $502.60
-
Fluke 787B ProcessMeter, TRMS DMM & mA loop calibratorProcessMeter, TRMS DMM & mA loop calibrator$1,714.95
-
Meriam M400-AI0100-02Precision Calibrator/DataLogger 0-100 PSIASpecial Price $4,891.04 Regular Price $5,558.00