Fluke 773 for Rent, Milliamp Clamp Meter
Milliamp Clamp Meter
Order #: 773-RENT1
Mfg #: FLUKE-773-RENT1
Call for price
Call for price
Fluke 773 for Rent, Milliamp Clamp Meter
Milliamp Clamp Meter
Order #: 773-RENT1
Mfg #: FLUKE-773-RENT1
Call for price
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Call for price
Availability:
In stock
Product Highlights
Overview
Need more hours in your day?
Save time by NOT breaking the loop on 4-20 mA signal measurements.
Are you spending time:
- Taking mA measurements by removing a wire and breaking the loop
- Calling the control room to isolate a loop
- Testing analog input/output on a console
- Troubleshooting devices with mA inputs and outputs
- Repairing intermittent or erratic 4-20 mA loops
- Going back to the shop to get extra tools
If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It™s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Features
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- Measure 4 to 20 mA signals with in-circuit measurement
- Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
- Source 4 to 20 mA signals for testing control system I/O or I/Ps
- mA output linear ramp or 25% step output
- DC voltage measurement to verify 24V power supplies or voltage I/O signals
- Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
- Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
- mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
- Voltage output linear ramp or 25% step output
Each Unit Includes
- Four AA alkaline batteries (installed)
- Soft carrying case
- TL75 test leads
- AC 72 detachable clip
- TL 940 mini hook test leads
- Instruction sheet
- Hanging tool with hook and loop strap
Webinars
All products in this series
- Fluke 771 Milliamp Process Clamp MeterMilliamp Process Clamp MeterSpecial Price $1,221.16 Regular Price $1,327.35
Related Products
- TorcUp TX-4-RL-70 for Rent, yink Low-Profile Torque Wrench, 70mmyink Low-Profile Torque Wrench, 70mmCall for price
- TorcUp TX-4 for Rent, Hydraulic Torque Wrench, 395 Ft/lbsHydraulic Torque Wrench 395 Ft/lbsCall for price
- TorcUp TX-4RL41M for Rent, Hex Link Low-Profile Torque Wrench, 41mmHex Link Low-Profile Torque Wrench, 41mmCall for price
- Fluke 750PD7 for Rent, Dual Pressure Module,-15/ 200PSI (-100/1380kPa)Dual Pressure Module,-15/ 200PSI (-100/1380kPa)Call for price
- Fluke 345 for Rent, Power Quality Clamp Meter 2000A 600VPower Quality Clamp Meter 2000A 600VCall for price
- Druck DPI620G for Rent, Genii Multifunction CalibratorGenii Multifunction CalibratorCall for price
- Fluke 700P27 for Rent, Gauge Pressure Module, 300 PSI (20bar)Gauge Pressure Module, 300 PSI 20barCall for price
- Druck MC620 for Rent, Pressure Module Carrier for the DPI620
Pressure Module Carrier for the DPI620
Call for price - TorcUp EP-500 115V for Rent, 115V Torque Pump-less amps to run115V Torque Pump-less amps to runCall for price
- TorcUp TX-4RL75M for Rent, yex Link Low-Profile Torque Wrench, 75mmyex Link Low-Profile Torque Wrench, 75mmCall for price
-
- TorcUp TX-8 for Rent, Hydraulic Torque Wrench, 830 Ft/lbsHydraulic Torque Wrench 830 Ft/lbsCall for price
-
- TorcUp TX-4-RL-50 for Rent, Hex Link Low-Profile Torque Wrench, 50mmHex Link Low-Profile Torque Wrench, 50mmCall for price
- TorcUp TX-4-RL-55MM for Rent, Hex Link Low-Profile Torque Wrench, 2 1/8" or 55mmLink Low-Profile Torque Wrench, 2 1/8" or 55mmCall for price
- Druck DPI620-KIT for Rent, Genii Modular Calibrator & HART Communicator kitGenii Modular Calibrator & HART Communicator kitCall for price
-
- Druck DPI611PC-13G for Rent, Pneumatic Pressure Calibrator, -15 to 300 PSIG, 0.0185Pneumatic Pressure Calibrator -15 to 300 PSIG, 0.0185Call for price
-
- TorcUp TX-4-RL-60 for Rent, Hex Link Low-Profile Torque Wrench, 60mmHex Link Low-Profile Torque Wrench, 60mmCall for price
How to Rent from Transcat
1. Select Your Rental Product
- Need help selecting a unit? Try using our Product Finder or search our available units
- Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
2. Contact Our Team of Rental Experts
- Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
3. Select Your Rental Period & Complete Your Order
- Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
- Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit