AEMC MR417
AC/DC Current Probe 40AAC 60ADC, 10mV/A & 400AAC, 600ADC

Order #: 1200.84

Mfg #: 1200.84

Questions about availability or need help? Contact Us:

(800) 633-0561
Special Price $517.37 Regular Price $544.60

AEMC MR417

AC/DC Current Probe 40AAC 60ADC, 10mV/A & 400AAC, 600ADC

Order #: 1200.84

Mfg #: 1200.84

Special Price $517.37 Regular Price $544.60
Availability: Ships in 1-2 weeks
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This product is available for shipping to the United States, Canada, and Puerto Rico only.

Product Highlights

The MR417 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (2m) lead terminated by a BNC connector and can measure up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).

40AAC, 60ADC, 10mV/A & 400AAC, 600ADC, 1mV/A, BNC Output

  • The jaw shape enables users to clamp on to cables or small busbars
  • Powered by battery or standard external 5V power supply via micro-USB connector
  • Measures up to 1000Aac and 1400Adc (model dependent)
  • Equipped with a Zero DC reset function
  • Auto Power Off enable/disable function
  • LED overload and low battery indicators
  • Millivolt output compatible with most equipment and instruments
  • Equipped with a coaxial lead and isolated BNC connectors for direct connection to an oscilloscope
  • Battery life up to 50 hours
  • Safety rating 600V CATIII
Win a Generac Generator when purchasing $750 or more from Transcat.Win a Generac Generator when purchasing $750 or more from Transcat.
Maximum Conductor Size 1.18" (30mm) or 2 bus bar 1.24 x 0.39" (31.5 x 10mm)
Current Range 0.5 to 40AAC, 60ADC & 0.5 to 400AAC, 600ADC
Output Signal 10mV/A & 1mV/A via a 6.5ft (2m) lead BNC cable
Accuracy 50/60Hz ≤1.5% @ 40A & ≤2% @ 400A
Frequency Range DC to 30kHz (-3dB) (depending of current value)
Phase Shift At 50Hz ≤2°@ 40A & ≤1.5° @ 400A
Load Impedance >1MΩ and ≤100pF
Overload 3000ADC or 1000AAC continuous for < 1kHz
Zero Adjust Automatic on both ranges
Power Supply 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B
Battery Life 50H typical
Low Battery Indication Green LED blinking
Overload Indication Red LED on when measurement > than selected range
Dimensions  (H x W x D) 8.82 x 3.82 x 1.73" (224 x 97 x 44mm)
Weight (with Battery) 0.98lbs (440g)
Operating Temperature 14° to +131°F (-10 to +55°C)
Storage Temperature -40° to +176°F  (-40 to +80°C)
Relative Humidity Up to 85% @ 35°C
Ingress Protection (Ip) IP 40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III