AEMC Instruments MR525 AC/DC Current Probe 1000AAC, 1mV/A and 1400ADC,1mV/A

AEMC Instruments MR525 AC/DC Current Probe

Order # 1200.81

Mfg # 1200.81

call-regular 800-828-1470
$470.47
  • Overview
  • Technical Resources
  • Specifications

AEMC Instruments MR525 AC/DC Current Probe

Order # 1200.81 | Mfg # 1200.81
$470.47

Tariff fees or manufacture imposed surcharges may be applicable.

Overview

Product Highlights

The MR525 is a hall effect current probe with a single range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).

1000AAC, 1mV/A & 1400ADC, 1mV/A, 4mm Banana Plug Lead

  • The jaw shape enables users to clamp on to cables or small busbars
  • Powered by battery or standard external 5V power supply via micro-USB connector
  • Measures up to 1000Aac and 1400Adc (model dependent)
  • Automatic Zero DC reset function
  • Auto Power Off enable/disable function
  • Millivolt output compatible with most equipment and instruments
  • Battery life up to 50 hours
  • Safety rating 600V CATIII

Technical Resources

AEMC MR415, MR416, MR525, MR526 Datasheet

Specifications

Maximum Conductor Size 1.53" (39mm) or 2 bus bar 1.96 x 0.19" (50 x 5mm)
Current Range 0.5 to 1000AAC, 1400ADC,
Output Signal 1mV/A via a 5 ft (1.5m) lead with 4 mm safety banana plugs
Accuracy 50/60Hz ≤2.5% @ 800A
Frequency Range DC to 30kHz (-3dB) (depending of current value)
Phase Shift At 50Hz ≤1.5°@ 800A
Load Impedance >1MΩ and ≤100pF
Overload 3000ADC or 1000AAC continuous for < 1kHz
Zero Adjust Automatic on both ranges
Power Supply 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B
Battery Life 50H typical
Low Battery Indication Green LED blinking
Overload Indication Red LED on when measurement > than selected range
Dimensions  (H x W x D) 9.31 x 3.82 x 1.73" (236.5 x 97 x 44mm)
Weight (with Battery) 1.15lbs (520g)
Operating Temperature 14° to +131°F (-10 to +55°C)
Storage Temperature -40° to +176°F  (-40 to +80°C)
Relative Humidity Up to 85% @ 35°C
Ingress Protection (Ip) IP 40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III