Order #: 720220-USED
Mfg #: 720220-USED
Yokogawa 720220 USED FOR SALE
Order #: 720220-USED
Mfg #: 720220-USED
Request a Used Instrument Quote
Have a Question? Speak to a Transcat Expert: 800.264.4059
Transcat Used Instrument Guarantee
Calibration Certificate Included 6 Month Warranty Unsurpassed Service & Support
Product Highlights
This is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit.
- Isolated (GND-terminal)
- Non-Isolated (CH-CH)
- Maximum allowable voltage between sub-channel high inputs 42V (DC + AC Peak)
Applicable to DL350 and DL850 series.
This is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit. Scan method measurements are possible by using a removable spring terminal block (removable in 8 channel sections) at the input. The input section uses Weidmueller B2L 3.5/16LH clamp connectors.
The maximum sampling rates are 200 kS/s (1 CH) and 10 kS/s (16 CH simultaneous). The minimum voltage input range is 200 mV/div, and the maximum is 42 V (direct input, 1 kHz or less).You can build a 128 CH measuring system by installing up to 8 modules in a single DL850/DL850V.
On each of the 16 channels (and subchannels) in the module, you can individually set the range and other input conditions, position, zoom, and other display conditions.
Input terminal blocks are isolated from ground. There is no isolation between channels within the input terminal block.
Input Channels | 16 |
---|---|
Input Coupling | DC, GND (Selectable for each sub-CH) |
Maximum Sample Rate | 200kS/s (single CH) [10kS/s when using 16-CH] |
Input Type | Isolated unbalanced |
Frequency Range (-3dB)*1 | DC to 5kHz |
Voltage-Axis Sensitivity Setting | 200mV/div (1-2-5 steps) |
Maximum Input Voltage (1kHz or less) | Direct Input - 42V (DC+ACpeak) |
Maximum Allowable Common Mode Voltage (1kHz or less) | Direct Input 42V (DC+AC Peak) (CAT 1 and CAT II, 30 Vrms) |
Vertical (voltage)Axis Accuracy | DC Accuracy ±(0.3% of 10div) |
Input Connector | Spring-type terminal (removable per 8CH) |
Input Impedance | 1MΩ ±1% |
Common Mode Rejection Ratio | 86 dB (50/60 Hz) or more (Typ.) |
A/D Conversion Resolution | 16-bit (2400 LSB/div) |
Temperature Coefficient | Zero point: ±(0.015% of 10div)/°C (Typ.) Gain: ±(0.01% of 10div)/°C (Typ.) |
Bandwidth Limit | OFF/500Hz (Selectable for each sub-CH) |
-
-
-
-
- National Instruments PCI-6031E Used for SaleData Acquisition Board,100kS/s 16-Bit,64-Analog Input$3,850.35
- Kaye 2000 SIM Used for SaleValidation Sensor Input Module for Kaye Validator 2000,12-Ch.Call for price
- National Instruments PXI-GPIB Used for SalePXI High-Performance GPIB Instrument Control Module$903.07
- Keysight / Agilent 44471A Used for Sale10-Channel General Purpose Relay Module, 2A, 250V, 1-Wire$331.17
-
-
-
- Keysight / Agilent 3497A Used for SaleData Acquisition Control Unit Mainframe, HP-IB interface$3,318.35
-
- Keysight / Agilent 34970A USED FOR SALEData Acquisition Switch Unit 6 1/2-digit internal DMM$1,582.70
- National Instruments PXI-8420/16 Used for SaleSerial Interface Module 16-Port (777733-16) w/RS-232$1,456.35
- National Instruments PXI-1045 Used for Sale18-Slot 3U Chassis with Universal AC Power Supply$6,183.17