AEMC MR527
AC/DC Current Probe 100AAC 150ADC,10mV/A & 1000AAC,1400ADC
Order #: 1200.85
Mfg #: 1200.85
Special Price
$651.70
Regular Price
$686.00
AEMC MR527
AC/DC Current Probe 100AAC 150ADC,10mV/A & 1000AAC,1400ADC
Order #: 1200.85
Mfg #: 1200.85
Special Price
$651.70
Regular Price
$686.00
Availability:
In stock
Product Highlights
The MR527 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (2m) lead terminated by a BNC connector and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
100AAC, 150ADC, 10mV/A & 1000AAC, 1400ADC, 1mV/A, BNC Output
- The jaw shape enables users to clamp on to cables or small busbars
- Powered by battery or standard external 5V power supply via micro-USB connector
- Measures up to 1000Aac and 1400Adc (model dependent)
- Equipped with a Zero DC reset function
- Auto Power Off enable/disable function
- LED overload and low battery indicators
- Millivolt output compatible with most equipment and instruments
- Equipped with a coaxial lead and isolated BNC connectors for direct connection to an oscilloscope
- Battery life up to 50 hours
- Safety rating 600V CATIII
Maximum Conductor Size | 1.53" (39mm) or 2 bus bar 1.96 x 0.19" (50 x 5mm) |
Current Range | 0.5 to 100AAC, 150ADC & 0.5 to 1000AAC, 1400ADC |
Output Signal | 10mV/A & 1mV/A via a 6.5ft (2m) lead BNC cable |
Accuracy 50/60Hz | ≤1.5% @ 100A & ≤2.5% @ 800A |
Frequency Range | DC to 30kHz (-3dB) (depending of current value) |
Phase Shift At 50Hz | ≤2°@ 100A & ≤1.5° @ 800A |
Load Impedance | >1MΩ and ≤100pF |
Overload | 3000ADC or 1000AAC continuous for < 1kHz |
Zero Adjust | Automatic on both ranges |
Power Supply | 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B |
Battery Life | 50H typical |
Low Battery Indication | Green LED blinking |
Overload Indication | Red LED on when measurement > than selected range |
Dimensions (H x W x D) | 9.31 x 3.82 x 1.73" (236.5 x 97 x 44mm) |
Weight (with Battery) | 1.15lbs (520g) |
Operating Temperature | 14° to +131°F (-10 to +55°C) |
Storage Temperature | -40° to +176°F (-40 to +80°C) |
Relative Humidity | Up to 85% @ 35°C |
Ingress Protection (Ip) | IP 40 |
EMC | EN 61326-1 |
Safety Compliance | IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III |
Related Products
- AEMC MF300-10-2-10HFMiniFlex Current Transformer, 30/300A, 10", 100mV/10mV/ASpecial Price $853.86 Regular Price $898.80
- AEMC 3000-36-2-1AmpFlex Flexible Current Probe, 300/3000A, 36", 10mV/1mV/ASpecial Price $691.60 Regular Price $728.00
- AEMC 3000-24-2-1AmpFlex Flexible Current Probe, 300/3000A, 24", 10mV/1mV/ASpecial Price $658.35 Regular Price $693.00
- Fluke TLK1550-RTLC Integral Test Lead & 10kV Clamp for 1550X/1555 Insulation TestersIntegral Test Lead & 10kV Clamp for 1550X/1555Special Price $520.46 Regular Price $584.79
-
-
-
-
-
- AEMC SR634AC Current Probe(250A-20mA/A, 500A-10mA/A,1000A-5mA/A,Jack)Special Price $410.97 Regular Price $432.60
-
- AEMC 3000-48-2-1AmpFlex Flexible Current Probe, 300/3000A, 48", 10mV/1mV/ASpecial Price $731.50 Regular Price $770.00
-
- AEMC 3000-24-1-1AmpFlex Flexible Current Probe, 3000A, 24", 1mV/ASpecial Price $598.50 Regular Price $630.00